TECHPOLYVOX 111TP

• At least two coats should be applied to the surface using a brush or roller, creating a minimum film thickness of 1-1.5 mm per coat.
• The dusty surface behind the ceramic should be wiped with a clean cloth.
• The second coat should be applied to the surface 30-35 minutes after the first coat has dried.
• It should not be directly intervened with water.
• In applications of ceramics over old ceramics, the drying time of the product may extend to 1-2 hours depending on environmental conditions and ceramic size.
• The surface should be free of thick layers that may prevent adhesion. Care should be taken that the surface has cured and is solid.
• The product should be mixed before starting the application.
• To achieve better adhesion, after spreading the product on the surface with the flat side of the trowel, it should be combed with the notched side of the trowel suitable for the size of the tiles.
• Tiles should be adhered by applying force onto the combed mortar within 30 minutes. In unsuitable environmental conditions such as high temperature, low humidity, and wind, this time may be shortened. Adhesion should not be performed on expired product; the product should be scraped off the surface.

• Used for adhering all types of ceramics on difficult surfaces exposed to deformation in indoor applications.
• Ready-to-use paste adhesive product used for adhering materials such as ceramic, porcelain, marble, granite, natural stone, glass mosaic, brick, travertine, etc. on indoor and outdoor wall and floor surfaces.
• In ceramic applications over old ceramics on plasterboard, plaster, and painted floors.
• Provides practical and clean working opportunities in adhesive applications for thermal insulation boards and decorative ceiling coverings indoors.

Ready-to-use

• Avoid application below +5°C and above +35°C.
• Pay attention to the amount of water remaining in the mortar.
• Do not add powder and water to expired mortar.

• It is recommended to use latex gloves during product application.
• The product should not be inhaled directly. A dust mask should be used if necessary.
• Products should be stored out of reach of children.
• Consult a doctor if necessary.
• R41 Risk of serious eye damage. Contains Chromium VI. Allergic reactions may occur.
• R43 May cause sensitization by skin contact.
• Keep out of reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• S37/39 In case of ingestion, seek medical advice immediately, showing the product container and label.